October 24, 2021: |
Introduction of Signal Processing Unit CYSPU-F98A to the market, for frequency and speed measurement using
gear tooth sensor with sinusoid and square output waves. The frequency measuirng range is 0.1Hz to 1MHz with measuring accuracy of 0.05% ~ 0.1% |
|
June 25, 2021: |
Intruduction of Gaussmeters CYGM99B and CYGM99C
for Measurement of DC and AC magnetic fields to the market. The Gaussmeters are powered with a rechargeable LiPo Battery (+3.7V) or via USB cable (+5V) has both display and data conmmuniction between Gaussmeter and computer system.
The Gaussmeter CYGM99C has an additional wireless data-communication with a computer or cell phone over the WIFI protocol for further signal processing.The Gaussmeters are made in Germany. |
|
March 15, 2021: |
Introduction of Split Core Hall Effect Current Sensors CYHCT-S3K and
CYHCT-L65K with various kinds of power supply and output signals to the market. |
|
March 1, 2021: |
Introduction of Optical Reflective Gear Tooth Sensor CYGTS102OR with sinusoid and square output waves
under a large sensing distance to the market for a wide measuirng range of rotational speed |
|
October 8, 2020: |
Introduction of Hall Effect Gear Tooth Sensor CYGTS102DC with sinusoid and square output waves
to the market for a wide measuirng range of rotational speed |
|
August 19, 2019: |
Update SGS Test for Hall Effect Switch ICs, lineare Sensor ICs and Elements
according to the newest RoHS Directive (EU) 2015/863. Our products are RoHS compliant according to the SGS test results. |
|
March 25, 2019: |
Intruduction of Gaussmeter CYGM99A
for Measurement of DC and AC magnetic fields to the market. The Gaussmeter has both display and data conmmuniction between Gaussmeter and computer system. This Gaussmeter is made in Germany. |
|
February 15, 2019: |
Intruduction of digital Hall Effect current sensors to the market, for DC and AC current measurement and system monitoring and control.
These sensors have both analog voltage output and digital output signal for data conmmuniction through RS-485 Modbus. They are made in Germany. |
|
September 25, 2018: |
Intruduction of AC split core current transformers for AC current measurement and system monitoring and control to the market. |
|
June 26, 2018: |
Certification of ISO9001:2015
by TÜV Süd Management Service GmbH for development, manufacture and distribution of products in the areas:
Sensors, measurement technology and magnetics, especially Hall Effect sensors, electromagnetic and photoelectronic measurement technology and permanent magnetic materials. |
|
August 11, 2015: |
Certification of ISO9001:2008
by TÜV Süd Management Servce GmbH for development, manufacture and distribution of products in the areas:
Sensors, measurement technology and magnetics, especially Hall Effect sensors, electromagnetic and photo electronic measurement technology and permanent magnetic materials. |
|
November 26, 2014: |
Registration of the Chinese trade markSONNECY for all ChenYang products in China |
|
November
21, 2014: |
Registration of the EU Community trade mark SONNECY for all ChenYang products |
|
February 5, 2014: |
ChenYang started with production of precise Open-Loop Hall Effect Current Sensors in Finisng/Germany |
|
December, 2013: |
Establishment of subsidiary company "SONNECY Technologies (Shanghai) Co., Ltd." in Shanghai, China |
|
October 25, 2013: |
ChenYang started with the production of Hall Probe for magnetic field Measurement in Finsing/Germany |
|
March 25, 2013: |
Establishment of subsidiary company "ChenYang Technologies (HK) Co., Limited" in Hong Kong |
|
November 5, 2011: |
Introduction of new
Hall Effect Gear Tooth Speed Sensor CYGTS101DC-Sand
Speed/Direction Sensor CYGTS104X to the market. These products are developed and
produced by ChenYang Technologies according to differential magnetic field detection |
|
June 8, 2011: |
Introduction of
New Magnetic Pole Detectors/Identifiers
to the market. These products are developed and produced by ChenYang Technologies |
|